Esen Plastik



CIRCULAR DRIP IRRIGATION PIPES
Properties of Circular Drip Irrigation Pipe:
 
Esen Circular Drip Irrigation Pipe has an integral structure and is produced in different pipe wall thicknesses. Circular Drip Irrigation Pipes are cylinderical and their drippers have a double-intake filtration area and has a long and broad labyrinth. This structure minimises the formation of residues which cause clogging.
  • They have a broad surface water pass.
  • They have a high resistance to clogging.
  • A homogeneous flow rate is obtained along the length of the drip pipe.
  • They are resistant to those chmicals and fertilisers used in agriculture.
  • Thay may be obtained at dripping distances from 20cm to 100cm.
  • Esen Drip Irrigation Pipes are produced in conformity with TS ISO 9261 standard.
  • They have a high water usage performance.
  • They have lower labour costs.
  • They not only provide convenience in disinfection and fertilisation but provide earliness in harvesting.
  • They may be used for all vegetables and fruits and decorative plants.
  • Advantages of Pressure-Adjusted PC Drippers:
    1- If the slope in the irrigated land is downhill or uphill, then the pressure-adjusted PC Dripper keeps the water output flow rate stable.
    2- As the lateral draught distance is longer, they reduce the installation costs in the irrigation project.
    3- PC Dripper stabilises the water output flow rates in longer drip pipes on flat land.
    4- They ensure equal growth of plants in greenhouses and seedbeds, orchards and gardens.
    5- When a pressure-adjusted PC Dripper is used in drip irrigation projects, project is safer and simpler.


    MAX. LAYING DISTANCE OF CIRCULAR DRIP IRRIGATION PIPES(m)
    Dripper Gap (cm) 20 25 33 40 50 60 75 100
    DIA 16mm WALL THICKNESS 0,8 mm FLOW RATE lt/h 1,2 60 70 85 99 117 133 156 193
    2 41 52 63 70 85 95 111 135
    4 30 34 40 47 55 63 74 90
    WALL THICKNESS 1mm 1,2 65 75 90 102 120 135 160 196
    2 47 58 68 80 95 109 128 155
    4 32 36 43 50 59 67 79 96
    PC DIA 16mm WALL THICKNESS 0,8mm FLOW RATE lt/h 2 50 61 72 83 100 115 135 155
    4 34 39 48 55 65 75 84 102
    WALL THICKNESS 1mm 2 54 65 75 86 105 119 139 161
    4 39 44 53 60 69 81 90 107
    DIA 20mm WALL THICKNESS 1mm FLOW RATE lt/h 2 75 82 96 117 138 156 185 210
    4 50 61 75 85 98 110 128 144

     



    Search

    Name:
    E-Mail:
       
    Programing & Design by Smartnet / all rights reserved © 2009 Esenplastik